Skip to the page
Compare quotes from local specialists in Sacramento
SACRAMENTO HEATING AND AC Get my quote
Outdoor condenser unit and furnace vent on a house wall

Guide ยท Sacramento

Furnace and air conditioner replacement cost

If your furnace and air conditioner are both aging, you can replace one, the other or both. This guide prices each option side by side and explains which questions decide it.

Revised

There is no sourced price range for replacing a furnace alone or an air conditioner alone, so this page does not make one up. What is sourced is the cost of replacing the whole system, furnace and air conditioner together, which Fixr puts at $8,000 to $20,000, and the cost of a heat pump installation, at $5,000 to $15,000. The right choice depends on the age and condition of each unit. This page compares the options; our wider guide to HVAC system installation cost covers full installs.

How much does it cost to replace a furnace or an air conditioner?

For a single piece, ask for a written quote. No fetched guide gives a range for a furnace alone or an air conditioner alone that this site can stand behind. The sourced ranges are for the whole system, for a heat pump and for individual repairs, and they give you a frame for comparing what a specialist quotes.

Job Sourced range
Whole HVAC system replacement (furnace and AC) $8,000-20,000
Heat pump installation $5,000-15,000
Furnace only No sourced range, ask for a written quote
Central air conditioner only No sourced range, ask for a written quote

The whole-system and heat pump ranges come from Fixr. If a specialist's quote for one piece looks close to the whole-system range, ask what is included, such as ducts, a new thermostat or removal of the old equipment.

Key price drivers are:

  • Capacity. Equipment must match the home's heating and cooling needs. Ask how the size was chosen.
  • Efficiency. AFUE shows how much of a furnace's fuel becomes heat. Higher is more efficient, so ask for the AFUE of the quoted model. SEER2 plays the same role for cooling.
  • Labor and access. A furnace or coil in a crawlspace, attic or tight closet takes longer to work on.
  • Extras. Removal of the old unit, ductwork and a change of fuel or equipment type all change the total.
  • Permits. Permit fees vary by city and county. Ask for the permit fee as a line on the quote.

These figures are a guide, not a quote. A local specialist quotes the real price after seeing your home.

Should you replace the furnace and AC together?

It can make sense to replace both together, because the furnace blower and the air conditioner coil work as one system and a matched pair is designed to run together. One visit may cover the labor, the permit and the thermostat, and you avoid a second disruption. If one piece is nearly new, replacing only the other can be sensible, but ask the specialist whether the old and new parts are compatible.

Older gas furnace with a coil box on top in a garage closet

If both units are old, or one needs a major repair, price both options. The Department of Energy's furnace analysis assumes an average residential furnace lifetime of 21 years. That is an assumption used for cost analysis, not a promise for your equipment, so ask a specialist about the condition of yours.

What about a heat pump instead?

A heat pump can replace both the furnace and the air conditioner in one unit. ENERGY STAR says that in most climate zones a ducted heat pump can replace a central air conditioner or furnace. Fixr puts heat pump installation at $5,000-15,000. See our comparison of heat pump vs gas furnace to weigh it up.

Is it cheaper to repair than replace?

Repair makes sense when the part is cheap and the unit is not old. A weak ignitor or capacitor is worth repairing. A cracked heat exchanger or failed compressor often tips the balance toward replacement. One guide offers a rule of thumb: multiply the repair quote by the unit's age, and if the result exceeds $5,000, replacement is usually smarter. It is a rule of thumb from one guide, not a standard.

Look at the repair prices on AC repair cost and furnace repair cost next to the replacement figures above. Ask for the repair and replacement quote in the same visit.

What affects labor and installation?

Labor is a large part of any replacement, and it changes with access, ducts and the size of the job. The Department of Energy names oversizing, improper charging and leaky ducts as causes of lost efficiency. That is why the installation matters as much as the equipment.

Things that add time and cost:

  • A furnace or coil in a crawlspace, attic or tight closet.
  • Duct repair or replacement. Ask for it as its own line on the quote.
  • A new thermostat. Ask whether one is included.
  • A change of equipment type, such as moving from electric to gas.

Replacing before a failure also gives you time to compare written quotes instead of choosing in a hurry.

What should an estimate include?

An estimate should name the make, model, capacity and efficiency of each unit, the labor, removal of old equipment, duct work, permits, the thermostat and the written warranty. Ask for the same scope from each specialist. Prices that differ by thousands often differ in what is included, not just in the equipment.

When should you call a local HVAC specialist?

Call when a major repair has been quoted on an old furnace or air conditioner, when both are near the end of their life, or when you plan to replace before a busy season. The specialist should visit, measure and check the ducts before quoting.

C-20 is the CSLB classification for warm-air heating, ventilating and air-conditioning work. Ask for the license number and check it on the CSLB License Check page of the California Contractors State License Board before you sign anything, and compare at least two written estimates. You can also begin at Sacramento Heating and AC or request quotes.

Get a price for your HVAC repair job

Fill this in and a local specialist gets back to you to quote.

So the business can look at the job and price it.

Questions people ask

How long does furnace and AC replacement take?

The time depends on what is being replaced and on your home, so ask each specialist for the schedule. A visit before that measures the home and writes the estimate. Equipment orders can add days. Ask each specialist for the schedule in writing when you compare quotes, and plan for the system to be off while the work is done.

What should I ask before I hire someone to replace a furnace or AC?

Ask for the California contractor license number, make and model, efficiency ratings, how the system was sized, what the price includes, whether a permit applies, the written parts and labor warranty and the schedule. Ask for the same scope from every specialist.

Do I need to be home for the replacement?

Yes, an adult should be home to give access to the furnace, the air conditioner, the attic or closet and the electrical panel, and to approve any change. Expect heating or cooling to be off for part of the day.

Which should I replace first, the furnace or the AC?

Replace the one that is older or failing, but ask whether the other will still match. Because they share the blower and ducts, a specialist may recommend both at once. Get a quote for each path before deciding. Ask the specialist whether the new unit will work with the existing one.

What efficiency rating should I look for?

For furnaces, AFUE shows how much fuel becomes heat, and a higher number is more efficient, so ask for the AFUE of the quoted model. For air conditioners, SEER2 shows cooling efficiency. Higher ratings can cost more upfront, so ask the specialist to explain the trade-off for your home.

Where these facts come from

Page updated