Skip to the page
Compare quotes from local specialists in Sacramento
SACRAMENTO HEATING AND AC Get my quote
A modern wall thermostat on a hallway wall

Prices ยท Sacramento

HVAC thermostat replacement cost in Sacramento

Fixr puts a programmable thermostat replacement at about $85 to $300, and a smart model at $185 to $600. This page shows what changes the price and what to ask.

  1. Tell us about the job. One short form, about two minutes.
  2. A local specialist gets in touch. They ask a few questions and quote.
  3. It is your call. Accept a quote, or don't.

Get a price for your HVAC repair job

Fill this in and a local specialist gets back to you to quote.

So the business can look at the job and price it.

Replacing a thermostat typically costs about $85 to $300 for a programmable model, with an average near $200, according to Fixr's thermostat installation guide, checked in November 2026. A smart thermostat runs about $185 to $600 installed. The thermostat tells your furnace, heat pump or air conditioner when to run, so a faulty one can make the system look broken. Labor is a small part of the bill, because a swap is a simple job when the wires are in good shape. Before you buy, read about thermostat repair, because some faults are wiring, settings or a dead battery, not the device. A local specialist quotes the real price.

How much does a thermostat replacement cost?

A programmable thermostat replacement typically costs about $85 to $300 in Fixr's guide, with an average near $200. A smart thermostat costs $185 to $600. The price depends on the type you choose, because the device is the biggest part of the bill, and then on labor and any wiring work.

Type of thermostat Typical installed cost
Programmable $85-300 (average about $200)
Smart or Wi-Fi $185-600

Faulty thermostat replacement costs the same as any other swap, because the price depends on the new device and the labor, not on why the old one failed. Searches for HVAC thermostat installation cost point to the same ranges. For a price on a job not in the table, such as adding wiring or moving the thermostat, ask for a written quote.

What does a smart thermostat cost compared with a programmable one?

A smart thermostat typically costs about $185 to $600 installed, compared with about $85 to $300 for a programmable one. You pay more for a Wi-Fi connection, a touchscreen, a phone app and learning features. Whether that pays off depends on how you use your home and your system.

ENERGY STAR says labeled smart thermostats are independently assessed, based on field data, for the energy savings they deliver. It adds that they can learn your preferences, set a schedule for when you are asleep or away and be controlled from a phone. Heating and cooling account for almost half of a typical household's energy bill, so a thermostat that runs the system more efficiently can matter. Check that the model works with your equipment, such as a heat pump or a multi-stage system, before you buy.

What pushes the price up or down?

The type of thermostat, the wiring and the location set most of the price. A swap that reuses the same wires is the simplest. Missing wires, a new location or damaged walls add cost. Labor rates and brand also change the total.

  • Wiring. Adding new wiring adds to the quote, so ask the specialist whether a wire is needed.
  • Relocating the thermostat. Moving it to a new spot is more work than a like-for-like swap.
  • Drywall. Minor wall repair after removing an old unit may be a separate line.
  • Multiple zones. A system with several zones can need a thermostat for each, though one smart model that handles several zones can be cheaper.
  • Compatibility. Some systems need a particular type, so a specialist should confirm the match.
  • Permit. Ask the specialist whether a permit applies to your job.

Money saved on a cheaper device can be lost if it does not suit your system, so compare quotes for the same type.

Can I replace a thermostat myself?

Your safe checks are the thermostat settings, fresh batteries and the breaker. Replacing the device involves wiring and a system that powers the furnace or air conditioner, so many homeowners ask a local specialist. A specialist starts by turning off power at the breaker, labels the wires and tests the system after the swap.

Thermostat wall plate with wires and a small screwdriver

Before you pay for a new thermostat, check the basics. Make sure the display is on, the batteries are fresh, the mode is set to heat or cool and the fan setting is correct. A fan that runs constantly may be set to on instead of auto. If the system still does not respond, see thermostat not working. If you smell gas or burning, or an alarm sounds, leave the home and call 911.

How do you compare thermostat quotes?

Ask each specialist for a written quote that names the thermostat model, the labor and any wiring or repair work. Compare the same type of thermostat across quotes, since a cheaper quote may be for a basic model. Ask whether the price includes setting it up and showing you how to use it.

Questions to ask: Is the thermostat compatible with my heating and cooling system? Do you need to add a wire? Are thermostat settings and schedules set up for me? What does the warranty cover on the device and the labor, in writing? C-20 is the CSLB classification for warm-air heating, ventilating and air-conditioning work. Ask any specialist for their license number and check it on the CSLB License Check page. Sacramento Heating and AC can pass your request to local specialists, and our HVAC repair cost guide shows prices for related repairs.

Questions people ask

How long does a thermostat replacement take?

It depends on the job. A like-for-like swap with working wires is a simple one. Adding a wire, moving the thermostat or fixing a wall takes longer. Ask the specialist for a time estimate. They should also test heating, cooling and the fan after the swap and show you how to set the schedule.

What should I ask before I hire someone for a thermostat replacement?

Ask whether the model works with your system, whether a new wire is needed and whether the price includes setup. Ask what the warranty covers on the device and the work, and for how long. Ask for their license number and check it on the CSLB License Check page.

Do I need to be home for a thermostat replacement?

Usually yes, at least briefly. The specialist needs access to the thermostat, the furnace or air handler and the breaker panel, and you will want to choose the temperature schedule or approve the new location. If you cannot be there, arrange access first and ask for a written summary.

Will a new thermostat lower my energy bill?

It can, if it fits your system and you use its schedule. ENERGY STAR says heating and cooling make up almost half of the average household's energy bill. A thermostat that avoids heating or cooling an empty home can help, but results vary. Ask the specialist which model suits how you use your home.

What are signs of a faulty thermostat?

The display is blank after you change the batteries, the system does not start or stop when it should, or the room temperature does not match the setting. Some of these are settings or power problems, not a failed device. Check the batteries and mode first, then ask a local specialist to test the wiring and the thermostat.

Where these facts come from

Page updated